Sediment source contribution and downstream mixing in a rural catchment, Coolbaggie Creek, NSW

Adam Wethered, Tim J. Ralph

    Research output: Chapter in Book/Report/Conference proceedingConference abstract

    Abstract

    Widespread land clearance and disturbance in Australian river catchments have led to an increase in sediment availability, mobilisation and delivery to tributary and trunk stream channels. Sediment supplied by major tributaries to the lower Macquarie River, in central New South Wales, is a critical factor for geomorphology and ecosystem health in the river and its floodplain wetlands. However, historical suspended sediment gauging data is rare and the little that is available shows consistently high turbidity levels in Coolbaggie Creek, the last major tributary in the catchment. This research investigated contemporary sediment sources and downstream sediment mixing in Coolbaggie Creek in order to understand the importance of catchment source types and connectivity on sediment dynamics. Fallout radionuclides (137Cs and 210Pbex) were used to characterise and trace key sediment source types in the system. Representative samples were taken of surface soils from various land use units across the catchment (e.g. forested and cleared surface sites), as well as sediment from sub-surface sources (e.g. channel banks and gullies). Fine-grained deposited sediment from reaches of Coolbaggie Creek was also sampled to enable proportional contributions of the source types to be determined with a mathematical mixing model. Radionuclides were able to clearly discriminate between forested surface (137Cs 11.28 ± 0.75 Bq/kg; 210Pbex 181.87 ± 20.00 Bq/kg), cleared surface (137Cs 3.21 ± 0.26 Bq/kg; 210Pbex 29.59 ± 10.94 Bq/kg) and sub-surface (137Cs 1.45 ± 0.47 Bq/kg; 210Pbex 4.67 ± 1.93 Bq/kg) sediment sources. Downstream hydrogeomorphic trends, radionuclide concentrations and mixing model results indicate that a rapid shift in dominant sediment source type occurs in the upper reaches of Coolbaggie Creek. Cleared surface areas account for 95% of fine sediment entering the channel in the uppermost reach, however, for the remaining ~50 km of the river, sub-surface (i.e. gully and bank) sediment accounts for 90 to 100% of sediment entering and being transported in the system. This shift in dominant source material coincided with a significant increase in channel cross-sectional area (from ~20 to >200 m2), highlighting the role of channel expansion and gullies in contributing sub - surface sediment to the system, and a lack of surface sediment supply to the channel. This also indicates a lack of lateral connectivity between topsoil and the trunk stream channel in all but the uppermost parts of the catchment. The significant enlargement and entrenchment of the channel downstream has also resulted in lateral disconnection between the channel and floodplain, while coarse sediment transfer is impeded by a sediment slug in the lower reaches. Altogether, these findings are important because the highlight the dominant source of suspended sediment entering the lower reaches of the Macquarie River from Coolbaggie Creek and have implications for water and land management.
    Original languageEnglish
    Title of host publication15th Australian and New Zealand Geomorphology Group Conference
    Subtitle of host publicationprogram and abstracts
    Pages105
    Number of pages1
    Publication statusPublished - 2 Dec 2012
    EventAustralian & New Zealand Geomorphology Group Biennial Conference (15th : 2012) - Bundanoon, NSW
    Duration: 2 Dec 20127 Dec 2012

    Conference

    ConferenceAustralian & New Zealand Geomorphology Group Biennial Conference (15th : 2012)
    CityBundanoon, NSW
    Period2/12/127/12/12

    Fingerprint Dive into the research topics of 'Sediment source contribution and downstream mixing in a rural catchment, Coolbaggie Creek, NSW'. Together they form a unique fingerprint.

    Cite this